-
28BYJ-48 Stepper Motor
The 28BYJ-48 is a low-cost, five-wire, unipolar stepper motor that uses a built-in gear reduction of approximately 64:1 to achieve precise movement for applications like automatic vents and small robotics. It operates on 5V, has four coils, and is typically used with a ULN2003 driver board. The motor has 2048 steps per revolution and its specifications include a 5.625° step angle before reduction and a rated current of around 500 mA.
රු950.00 -
A4988 Stepper Driver
The A4988 Stepper Driver supports bipolar stepper motors, operates from an 8V to 35V motor supply, and a 3.3V to 5.5V logic supply. It can deliver up to 1A per phase without a heatsink, and up to 2A per phase with sufficient cooling. Key features include five micro-stepping modes (full, 1/2, 1/4, 1/8, and 1/16), adjustable current limiting, and protection against thermal shutdown, overcurrent, and short circuits.
රු260.00 -
-
-
Arduino Mega 2560
The Arduino Mega 2560 is a microcontroller board based on the ATmega2560. It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button.
රු4,990.00 -
Arduino Nano
The Arduino Nano is an open-source breadboard-friendly microcontroller board based on the Microchip ATmega328P microcontroller and developed by Arduino.cc and initially released in 2008. It offers the same connectivity and specs of the Arduino Uno board in a smaller form factor.
රු990.00 -
Arduino Uno R3
The Arduino Uno R3 is a popular microcontroller board based on the ATmega328P. It features 14 digital I/O pins, 6 analog inputs, a 16 MHz clock, USB connection, and power jack. It is widely used for beginners and hobby projects due to its simplicity, reliable performance, and compatibility with many sensors, shields, and modules.
රු5,490.00 -
Arduino UNO R3 ATMega328P ATMEGA16U2 Genuine Board
Microcontroller ATmega328P Operating Voltage 5V Input Voltage (recommended) 7-12V Input Voltage (limit) 6-20V Digital I/O Pins 14 (of which 6 provide PWM output) PWM Digital I/O Pins 6 Analog Input Pins 6 DC Current per I/O Pin 20 mA DC Current for 3.3V Pin 50 mA
රු5,490.00 -
Arduino uno r3 compatible
rduino Uno R3 compatible boards are a great alternative to the original board, as they use the same ATmega328P microcontroller and are fully compatible with the Arduino IDE, libraries, and most shields. Key features often include 14 digital I/O pins, 6 analog inputs, and a USB connection for programming and power. These boards are suitable for beginners and hobbyists for building projects like robotics, sensor monitoring, and IoT prototypes
රු950.00 -
-
-
L293D Module
An L293D module is a motor driver board that uses the L293D H-bridge IC to control the speed and direction of two DC motors or one stepper motor. It’s designed to interface with microcontrollers like the Arduino and can handle motors with voltages from \(4.5\)V to \(36\)V, providing up to $600$mA of continuous current per channel, and is suitable for robotics and mechatronics projects.
රු440.00
Back To Top
